+86 755-83044319

Events

/
  • Updated: 2022-03-17
  • Views: 5572
The IGBT power module IGBT power module is a power module composed of an insulation grid bipolar transistor (IGBT). Because the IGBT module is the MOSFET structure, the IGBT gate is isolated from the emission polar electrical isolation through the oxide film, which has excellent device performance. Widely used in the f……
  • Updated: 2022-03-17
  • Views: 6133
What is the power device for isolation driving IGBT? How much do you know about isolation driving IGBT power devices? Power devices such as IGBT need to be fully protected to avoid damage caused by lack of pressure, lack of saturation, Miller effect, overload, short circuit, etc. So what power device is isolation drivi……
  • Updated: 2022-03-17
  • Views: 5716
What should I pay attention to using the IGBT driver? In recent years, IGBT's new power switching device has gradually been recognized by people. Compared with previous electrical electronic devices, IGBT's current comprehensive performance advantages are obvious, and more and more use of various power conversion devic……
  • Updated: 2022-03-17
  • Views: 5689
How to judge the quality of the IGBT drive board? The detection of the driver board is usually the drive board and the motherboard and the main circuit, that is, the driver IC is powered by the power supply, of course, the drive circuit can be repaired separately; the quality of the drive board can be detected without ……
  • Updated: 2022-03-17
  • Views: 5785
Which of the diodes, triode and field effect pipes cause permanent damage after breakdown? The breakdown of PN knots can be divided into avalanche breakdown, tunnel breakdown and thermal piercing. The first two generally have no destructiveness. If the reverse voltage decreases immediately, the performance of the PN kn……
  • Updated: 2022-03-17
  • Views: 5503
What are the characteristics of patch LED? Patch LEDs are mainly used in lighting systems, decoration, electronic devices indicators, backlight, display and instruments and other fields. So what are the characteristics of patch LED? (1) The principle of luminous light belongs to the cold hair, instead of heating or dis……
  • Updated: 2022-03-17
  • Views: 5530
Patch LED's precautions Patch LED, also called patch -type LED, is a simple light. Its light emitting principle is that the current is over -the -LE semiconductor, and excess energy will be released through the combination of electron and holes in the form of light to achieve the lighting effect. 1. Clean, do not use u……
  • Updated: 2022-03-17
  • Views: 5665
What are the applications in the principle of diode? As we all know, the diode has the characteristics of unidirectional dynamics and can be applied to these fields: 1. Rectifiers and rectifier diode are mainly used for rectifier circuits, that is, converting AC power to DC, the pulsating rectifier diode Its operating ……
  • Updated: 2022-03-17
  • Views: 5521
The principle of diode and introduction of the principle of diodes is that when the forward voltage bias is generated, the external electrical field and the self -built electric field are mutually suppressing and eliminated, increasing the diffusion current of the carrier, causing positive current, thereby conducting e……
  • Updated: 2022-03-17
  • Views: 5808
The use of diode is used in parallel and half of the two -pole two diodes of each two -pole circuit, each of which is connected by one -third of the total current of the circuit. In short, there are several diode parallel, "the current flowing through each diode is equal to one -third of the total current. However It w……
  • Updated: 2022-03-17
  • Views: 5304
The indicator light of electronic products. 1. As long as the circuit is connected to 220V/50Hz AC power cord, the LED will light up, indicating that the power supply is connected. The resistance value of the current limit resistance R is 220V/if. 2. AC switch indicator Lights incandescent lamp switch indicator light c……
  • Updated: 2022-03-17
  • Views: 5809
What is the diodes of the patch? It is an electronic device with one -way conduction current. There is a PN knot and two lead terminals in the semiconductor diode. This electronic device is converted in one -way current according to the direction of applying voltage. Generally speaking, the diode of the patch is a P-N ……

News recommendation

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat