Events

Application of Hall element in electric vehicle handle

Updated: 2022-03-17
Views: 6667

At present, electric vehicles are basically one of the indispensable means of transportation for every family, and the safe driving of electric vehicles is also very important. With the development of science and technology, all kinds of electric vehicles and accessories have adopted new safety monitoring technology, e……

see details >>

Hall effect and Hall element

Updated: 2022-03-17
Views: 7890

When a current flows through a semiconductor in a magnetic field, it generates a voltage (hall voltage) in a direction at right angles to the current. This phenomenon is known as the Hall effect. Hall element is a magnetic detection element using hall effect. Hall elements are made from InSb (indium antimonide) and GaA……

see details >>

What are the advantages of two IGBT modules in parallel over one IGBT?

Updated: 2022-03-17
Views: 7382

What are the advantages of two IGBT modules in parallel over one IGBT? There are several reasons for using IGBT in parallel: First, demand reduces cost. Taking Dianping as an example, although the product stability can be improved by directly purchasing finished modules from Semikong and other manufacturers, the corres……

see details >>

What are the functions of IGBT module?

Updated: 2022-03-17
Views: 6695

IGBT power module is driven by IC, various drive protection circuits, high-performance IGBT chip and new packaging technology. It has developed from composite power module PIM to intelligent power module IPM, power electronics building block PEBB and power module IPEM. PIM is developing in the direction of high voltage……

see details >>

The basic working principle of thyristor and its application in the lighting device

Updated: 2022-03-17
Views: 6521

Reversely connected. Its function is not only rectifier, but also the rapid connection or cutting of the non -contact switch, realizing the inverter of the DC power into AC power, turning the AC electricity of one frequency into another frequency AC power, and so on. Like other semiconductor devices, it has the advanta……

see details >>

Why can't SIC devices replace IGBT?

Updated: 2022-03-17
Views: 6912

Why can't SIC devices replace IGBT? The production process and technologies of silicon carbide (SIC) devices are becoming increasingly mature. The biggest obstacle to marketing is the cost. Including research and development and production costs, and the cost of driving capacitance resistance in the entire circuit afte……

see details >>

What are the commonly used IGBT buffer circuits?

Updated: 2022-03-17
Views: 6603

What are the commonly used IGBT buffer circuits? Because the electrical electronic devices have four working status: ON, ON, Turbus, and OFF, the OFF and ON status are supported by high voltage and large current respectively. Streaming, excessive DI/DT, DU/DT and excessive instantaneous power. Therefore, in order to pr……

see details >>

How to use a multimeter to detect thyroid control

Updated: 2022-03-17
Views: 6979

How to use a multimeter to detect thyristor with thyristor of thyristor, one -way thyristor and two -way thyristor, all have three electrodes. One -way thyristor rectifier has cathode (K), anode (A), control pole (G). Two -way thyristor is equivalent to two single -thyroid reverse parallel parallel. That is, one unidir……

see details >>

Semiconductor triode parameter symbol and meaning

Updated: 2022-03-17
Views: 6435

The semiconductor triode parameter symbol and its significance If the total current seductive coefficient β \\u003d IC/IB \\u003d 100 is emitted, the collector current IC \\u003d β*IB \\u003d 10mA. When the collector load resistance is 500Ω, the voltage drops VRC \\u003d 10mA*500Ω \\u003d 5V, and the voltage drop betwe……

see details >>

Precautions for Module Selection-Direction angle requirements

Updated: 2022-03-17
Views: 6638

Precautions for module selection-Direction angle requires that the module outputs a large current when the module (that is, the module high input voltage, low output voltage) output, which will cause the module to be severely heated or even burned. This is because the current value measured with a normal instrument und……

see details >>

Three main reasons for threading threaded

Updated: 2022-03-17
Views: 6804

Three main reasons for thyristor breakdown 1. Overdrawing: Over -crushing breakdown is one of the main reasons for thyristor breakdown. The thyristor has almost no time to withstand the voltage, even if the voltage is performed within a few milliseconds. Therefore, in the actual application circuit, the ends of the sil……

see details >>

Module protection-overheating protection

Updated: 2022-03-17
Views: 6481

Module protection-overheating protection heat dissipation is an important factor that affects whether the module can work safely. Good heat dissipation conditions can not only ensure the reliable operation of the module, prevent the module from overheating, and improve the current output capacity of the module. In the ……

see details >>

Events

News recommendation

Popular tags

Products Recommended

see more +

Advisory Service