Technical Blogs-SLKOR Semiconductor: Discrete Semiconductors Manufacturer

【Daily Highlight】LM2596SX-ADJ: A High-performance DC-DC Power Chip Developed by Slkor

Updated: 2023-10-20
Views: 5494

The "2023 Automotive Semiconductor Eco Summit and Global Automotive Electronics Expo" was held grandly at the Shenzhen Convention and Exhibition Center. The summit and exhibition covered areas such as high-power devices, thermal components, automotive electronic equipment, intelligent manufacturing, IC design and techn……

see details >>

【Daily Highlight】LM2596S-ADJ DCDC voltage stabilizing power converter

Updated: 2023-10-20
Views: 5466

LM2596/LM2596HV is a fixed frequency PWM DCDC voltage stabilizing power converter with fixed frequency of 150KHz. With the 3A output current driving ability, it has characteristics such as high efficiency, low ripple wave, high linear adjustment rate and load regulation.With the PWM modulation mode,the chip can adjust ……

see details >>

【Daily Highlight】SLKOR SL2733 DC/DC Boost Converter

Updated: 2023-10-19
Views: 5619

The SL2733 is a DC/DC boost converter that can provide constant and precise drive currents for multiple LEDs synchronously. With a fixed switching frequency of 1MHz, the SL2733 can be used with external ceramic capacitors and inductors with small consumption. Also, the SL2733 can drive multiple LEDs connected in series……

see details >>

The dependency on EUV lithography for this equipment continues to increase II

Updated: 2023-10-18
Views: 6670

Why are leading semiconductor companies like Intel and TSMC, as well as top global investment institutions like Bain Capital, eager to get close to a small company like IMS? The main reason is that the development of advanced processes is becoming increasingly challenging, and the dependency on high-precision semicondu……

see details >>

The dependency on EUV lithography for this equipment continues to increase I

Updated: 2023-10-18
Views: 6294

Why are leading semiconductor companies like Intel and TSMC, as well as top global investment institutions like Bain Capital, eager to get close to a small company like IMS? The main reason is that the development of advanced processes is becoming increasingly challenging, and the dependency on high-precision semicondu……

see details >>

【Daily Highlight】SLKOR LM2577S-ADJ Protection and Stability in Boost Converters

Updated: 2023-10-17
Views: 6000

SLKOR has always been dedicated to the research and application of domestically developed substitute technologies, and has achieved remarkable results. As early as 2015, SLKOR successfully achieved mass production of silicon carbide power devices, SiC MOS, and SiC SBD, providing excellent solutions for electric vehicle……

see details >>

SLKOR® Miniature Relay Driver Solutions

Updated: 2023-10-17
Views: 6822

Small relays are commonly used in electronic systems to control circuit switching, and they have widespread applications in industrial equipment, instruments, and household appliances. The heart of modern control circuits is usually computer chips such as MCUs, DSPs, and FPGAs. These core chips do not have enough outpu……

see details >>

EUV Lithography Factory? Introduction to Engineering Technology and Scientific Principles of Chip Manufacturing and Lithography (VII)

Updated: 2023-10-13
Views: 6667

The key idea of steady-state micro-bunching is to introduce laser modulation into the electron storage ring of traditional synchrotron radiation accelerators. Originally, the electron bunching in the storage ring was achieved using "RF cavities" for microwave radio frequency, but this was replaced by a much more comple……

see details >>

EUV Lithography Factory? Introduction to Engineering Technology and Scientific Principles of Chip Manufacturing and Lithography (VI)

Updated: 2023-10-13
Views: 7360

From the official news of Tsinghua University in early 2023, it can be seen that the starting point of the Xiong'an SSMB project is to solve the problem of "neck bottlenecks" in chip production with the support of a ministry. It can be seen that the location and building model of the project have been determined, but i……

see details >>

EUV Lithography Factory? Introduction to Engineering Technology and Scientific Principles of Chip Manufacturing and Lithography (V)

Updated: 2023-10-13
Views: 6405

As we all know, the industry later improved the situation by using a 13.5nm EUV light source, hence the name EUV lithography. Why did they directly jump from a 193nm light source to 13.5nm? Shouldn't there have been gradual reductions like 436-365-248-193nm?

see details >>

EUV Lithography Factory? Introduction to Engineering Technology and Scientific Principles of Chip Manufacturing and Lithography (IV)

Updated: 2023-10-13
Views: 7043

The chip manufacturing process described above is applicable to both traditional chips (28nm and above) and advanced process chips (14nm and below). Currently used photolithography machines use mainly DUV light sources, with a light source generator producing ArF (argon fluoride) excimer lasers at a wavelength of 193nm……

see details >>

EUV Lithography Factory? Introduction to Engineering Technology and Scientific Principles of Chip Manufacturing and Lithography (III)

Updated: 2023-10-13
Views: 6603

Both EUV and DUV lithography machines are highly advanced machines, with high demands for industrial production volume and speed. If every step requires re-alignment, assuming that the lithography machine can only process one die per minute, it would process only slightly over 1000 dies per day, and the factory would r……

see details >>

Technical Blogs

News recommendation

Popular tags

Products Recommended

see more +

Advisory Service