+86 755-83044319

Technical Blogs

/
/
Daily Highlight
The best-selling products of Slkor.
  • Updated: 2022-03-17
  • Views: 5328
Diamond wafer. They pointed out that this industry's breakthrough 300 mm CMOS diamond wafer will enhance the power processing, thermal management and durability of electronic products in various industries, but it will not make any changes to the manufacturer's existing manufacturing process. Due to its inherent charac……
  • Updated: 2022-03-17
  • Views: 5165
The research and application of ultra -wide -wide procedure semiconductor materials (forbidden bandwidth\\u003e 4.5 E V) represented by diamond, oxide, aluminum nitride, and boron nitride, etc., has continuously obtained technological breakthroughs in recent years. This type of semiconductor material has higher bandwid……
  • Updated: 2022-03-17
  • Views: 4820
In recent years, Nitride has gradually entered the system from the original third -party brand accessories, becoming the standard for many mobile phones and laptops. At the same time, the application field of nitride technology in the consumer power supply market has also been expanded. From a single fast charger, it g……
  • Updated: 2022-03-17
  • Views: 5406
Introduction: In the continuous expansion of time scene applications, electronic systems have put forward higher and more complex technical requirements for timing components, and traditional quartz crystals cannot overcome their inherent restrictions. , Limited frequency and other disadvantages. It can no longer meet ……
  • Updated: 2022-03-17
  • Views: 5251
I have always wanted to tell you about the theory of ESD, which is classic. However, because the theoretical is too strong, any theory is one by one. If you do not draw eggs, you will not draw David. Let's talk about what is the electrostatic discharge (ESD: Electrostatic Discharge)? This should be the main culprit tha……
  • Updated: 2022-03-17
  • Views: 5251
Integrated circuit (Hall Effect IC), Hall Effect Sensor IC, Hall Sensor, Hall circuit, Hall IC. Hall is sometimes translated into Huo Er, so it can also be called Huo Er integrated circuit. The following is referred to as Hall IC. Hall IC is usually divided into digital Hall IC and linear Hall IC according to the outpu……
  • Updated: 2022-03-17
  • Views: 5238
I. 3D packaging will become the main process from: Recently, the research director of the Taiwan Institute of Industrial and Technology of China will predict that TSMC will dominate the chip manufacturing industry for five years. After that, 3D packaging will become the main process challenge. In the past ten years, va……
  • Updated: 2022-03-17
  • Views: 5259
The working status of MOS in the controller circuit: the process of opening (from the transition process from the deadline), the transition status, the process of turning off (from the transition process from the diversion to the deadline), and the deadline. The main loss of MOS also corresponds to these states, switch……
  • Updated: 2022-03-17
  • Views: 5181
The power-driven system is mainly used in the inverter DC-AC, and the DC electricity conversion of the charging battery 12V is converted into an AC electric drive motor of the drive motor 220V. Dozens of IGBTs need to be used on the motor control system. After output high voltage from the battery, it needs to be change……
  • Updated: 2022-03-17
  • Views: 4743
In the IEEE SPECTRUM Chinese version of "Science and Technology Observation" in May 2002, the late Lester F. East-Man and Umesh K.Mishra (Umesh K.Mishra) Speaking of a bold technology in the power semiconductor industry at the time: Nitride (GAN). They expressed an optimistic view on the prospects of the emerging broad……
  • Updated: 2022-03-17
  • Views: 4809
The installation and debugging of the PLC control system involves various tasks, and it can only be carried out in order. One ring is closely linked to one ring. A little carelessness will cause the debugging failure, which will not only delay the construction period, but even damage the equipment. This article introdu……
  • Updated: 2022-03-17
  • Views: 4955
The principle of frequent DC motors is electromagnetic magnetic: the power -powered wire will produce a magnetic field. That is, the electromagnetic induction rotation magnetic field drives the rotor. The motor is composed of stator and rotor, one generates a rotary magnetic field, one is the magnetic pole, and the rot……

News recommendation

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat