+86 755-83044319

Technical Blogs

/
  • Updated: 2022-12-07
  • Views: 7656
Its common feature is that it has three electrodes, which is the origin of the abbreviation "triode". Generally speaking, the interior of the triode is a three-layer structure composed of P-type semiconductors and N-type semiconductors, which are divided into NPN type and PNP type according to the hierarchical order.
  • Updated: 2022-12-07
  • Views: 5391
In China, cars are basically standardized products when they leave the factory. In order to meet the personalized and diversified needs of car owners, there is a huge "car aftermarket", namely 4S stores, maintenance stations, and modification plants, where automobile enthusiasts can modify or add some products into the……
  • Updated: 2022-12-06
  • Views: 7559
Its main function is current amplification (analog circuit) and switching action (digital circuit).
  • Updated: 2022-12-01
  • Views: 7021
No matter how the TV is generated here, such as direct or indirect lightning strikes, electrostatic discharge, large-capacity load switching and other factors cause surges. The voltage ranges from a few volts to tens of kilovolts or even higher.
  • Updated: 2022-11-26
  • Views: 7624
The advantages of TVS tubes: 1. The response speed is extremely fast (Ps level); 2. The breakdown voltage ranges from 6.12V to 550V; 3. The clamping voltage is more accurate.
  • Updated: 2022-11-18
  • Views: 7634
The TVS tube is a high-efficiency protection device. When the two ends are subjected to an instantaneous high-energy impact, the TVS tube can instantly convert its high-resistance characteristics into low-resistance characteristics, absorb large currents, and clamp the voltage at both ends of the TVS tube. At a certain……
  • Updated: 2022-11-17
  • Views: 6359
ESD electrostatic protector is an overvoltage, anti-static protection component, used to protect sensitive circuits in electronic equipment from the influence of ESD (electrostatic discharge), asThe purpose is to transfer the ESD stress from the sensitive component, so that the current flows through the protective comp……
  • Updated: 2022-11-12
  • Views: 6758
1. Regarding the relationship between the peak value of absorbed power of transient voltage and the pulse width of transient voltage, the manual only gives the ……
  • Updated: 2022-11-09
  • Views: 7670
1. What is a fast recovery diode Fast recovery diodes are commonly used in higher frequency rectification and freewheeling products. Generally used for the i……
  • Updated: 2022-11-09
  • Views: 6412
TVS Diodes vs Zener Diodes: Compared to traditional Zener diodes, TVS TVS diodes have a larger P/N junction area. This structural improvement allows TVS to have stronger high voltage withstand capability while reducing voltage cut-off rate, so it has a be
  • Updated: 2022-04-20
  • Views: 6751
We know that when the sub -modules of the circuit system are transferred to data exchange, there may be some problems that cause the signal to "circulate" the signal that the signal cannot be normal and high quality. The types of their respective signals are inconsistent (such as sensor detection signal), etc. At this ……
  • Updated: 2022-04-20
  • Views: 6426
Today I said a voltage PWM controller, which is the LM5025 chip. Let's take a look at its basic parameters. Basic features: The chip built -in startup bias regulator, which has a programmable low -voltage lock output function (UVLO), voltage drive, 5V reference voltage, programmable soft startup function, and heat -cut……

News recommendation

Service hotline

+86 0755-83044319

Hall Effect Sensor

Get product information

WeChat

WeChat